Doors consist of door frames constructed from kiln-dried 3/4-in solid hardwood with mortise and tenon or mitered joints and floating center panels.
Cabinet side panels are 1/2-in thick plywood with our BeautyGuard® UV-cured finish for the exterior and natural woodgrain laminate for the interior. They are captured into a grooved front face frame and secured using high-strength fasteners and glue.
Cabinet front face frames are made from 3/4-in x 1-5/8-in solid hardwood, and are kiln-dried to prevent warping. Face frame joints are pressure-fitted, glued, double-doweled and stapled.
Fully-concealed, 6-way adjustable Soft-Close Hidden Hinges®.
Full-Access, Soft-Close glides.
Cabinets utilize natural finish dovetail hardwood drawers with plywood bottoms and Full-Access Soft-Close glides. All standard drawers are 5/8-in thick 21-in deep dovetail hardwood with plywood bottoms and Full-Access Soft-Close glides. All drawers meet KCMA load standards of 15 pounds per square foot.
Deep Roll Out Accessories utilize natural finish dovetail hardwood drawers with MDF bottoms. Trays meet KCMA load standards of 15 pounds per square foot. Deep Roll Out Trays feature Full-Access Soft-Close glides.
Cabinet shelves are 3/4-in thick full-depth plywood in natural woodgrain. Shelves are banded on one side with PVC edge banding. All shelves are adjustable and meet KCMA load standards of 15 pounds per square foot.
Nickel plated 1/4-in steel metal shelf rests are standard on all Wall cabinets and Bookshelves. Clear high strength polycarbonate clip lock shelf rests are standard on all Base and Tall cabinets. Clip lock shelf rests lock shelves in place, prevent sliding and allow for easy shelf removal.
Inset Toe Kicks are constructed of 1/2-in thick unfinished plywood and are recessed 3-1/2-in. BTK8 (matching toe kick) required for installation.
Tops, bottoms and floors are 1/2-in thick plywood. They are finished in natural woodgrain laminate. They are fitted and glued into the cabinet front face frame grooves, then captured in the grooves of the cabinet side panels.
The cabinet back is constructed of 1/8-in thick plywood with the inside surface finished with natural woodgrain laminate.
The base hanging rails are 3/4-in thick hardwood, mortise and tenon joined and glued to the cabinet side panels. The Wall cabinet hanging rails are 1/2-in thick plywood glued and pinned into the cabinet back, cabinet side panels, and cabinet top and bottom.
Corner blocks are made of 1/2-in plywood and are attached to help ensure cabinet squareness and allow for proper countertop installation.